Thursday, November 12, 2015

DIY Nissan Leaf Trunk Light Bulb troubleshoot....

My Leaf's trunk light not function when i open the trunk lid. So i remove the trunk light and found that the connector was disconnected.

The only tool needed is a flat-head screwdriver with small piece of fabric used to pry out the light housing.


1. Open the trunk lid and locate the cargo area light bulb housing at the right side.

2. Insert a small flat-head screwdriver in to the notch on the passenger side of the housing.

3. Gently pry out the edge of the light housing and then remove it from the panel of the trunk.

4. Connect the electrical connector

If you need to replace the old bulb gently press the release tab on the electrical connector and slide it straight off the housing.

No comments:

Post a Comment